Adjusting the ignition offset/setting the burner ignition position may get the gas igniting again on FlexiBurn 780.
The ignition offset is a measure of how far from the vertical the burner has to move back so that its tip is under the ignition electrodes. Increasing the offset moves the burner ignition
position further back away from the rig / vertical.
The full instructions with images and diagrams are included in the PDF document.
WARNING: Any maintenance work undertaken on a James Heal instrument must be done so by a trained and competent person. Where electrical work is detailed, this should only be completed by a qualified engineer. James Heal is not responsible for damage or injury arising from work carried out by any person not qualified to do so. If in doubt, please contact James Heal or your local James Heal Agent.
If you require further support on this issue, our Service & Calibration Engineers will be able to help. Either submit a ticket here, or contact your local James Heal representative for further support.